Tag: filter

2 Layer Face Mask with Filter Pocket

6 Comments

I am constantly trying the think of new ways to improve face masks. I am going to be wearing these every day to work like many of you and I hope to create masks that are both comfortable and functional.

After making the 3 layer mask with a filter pocket I thought I would give this one a try. I was very pleased with the results.

3img_1925

This mask uses my regular contoured face mask pattern, but cut at the pocket line, so it is a bit more narrow. This actually is nice because it’s not as hot since it doesn’t extend as far toward the ears.

1img_1931

The channel for the nose bridge wire is optional, but is simply a row of stitches attaching the lining to the exterior fabric.

1img_1952

I didn’t use any interfacing on mine, and I really like how lightweight it is, even with the filter.

1img_1947

I also tried strap adjusters with this mask. They are handy and are quite easy to use. I like that they are small and not bulky.

Supplies:

8 x 10 inches Main Cotton Fabric (Dimensions work for all sizes. You may need less fabric for smaller sizes)

8 x 10 inches Lining Cotton Fabric

Straps (I used 1/8 inch elastic)

Filter (Optional)

Nose Bridge Wire (Optional)

Strap Adjusters (Optional)

Free Pattern:

Contour Face Mask Pattern with Filter Pocket by learncreatesew

DETAILED INSTRUCTIONS:

FACE MASK KEY CHAIN CASE:

The face mask key chain case is always a fun project 🙂 It’s a little tight fitting the nose bridge wire, and you have to fold the filter, but I like to store my mask in the case when it’s not in use, without the filter and wire. I find it keeps my masks nice and organized.

Contour Face Mask with Nose Bridge Wire and Filter Pocket

Leave a comment

If you are looking for a face mask that provides additional protection, then this may be the mask for you. Nose bridge wire allows for a more personalized fit, and a filter will make your mask more effective.

1img_1287

This mask uses the same basic pattern shape as my regular Contour Face Mask, but has additional features. The updated pattern, with pockets, is linked below.

1img_1261

Adding nose bridge wire will let less air escape from the top of the mask and will force more air through the filter. I have heard it also helps minimize the fog you get if you wear glasses.

1img_1291

I made a size Medium and my purchased filters that I found on Amazon fit quite nicely inside. The filters are 4.72 x 3.15 inches. Smaller sizes may need filters or filter fabric that can be trimmed.

1img_1303

Supplies:

These dimensions will work for all sizes. Actual size needed may be smaller if you make a smaller size.

About 8 x 15 inches Main Cotton Fabric

About 8 x 15 inches Lining Fabric (I used cotton)

About 8 x 13 inches of Pocket Fabric (I used cotton)

Elastic, Ribbon, or Fabric for Ties.

Nose Bridge Wire (Mine is 9mm wide.)

Filter or Filter Fabric

Here is the free pattern:

Contour Face Mask Pattern with Filter Pocket by learncreatesew

DETAILED INSTRUCTIONS